Home Contact
 Contract Manufacturing
Coax Cable Assemblies
Subassemblies
Wiring Harnesses

Coax Cable Assemblies
Test Cables (SHIELD TEST)
Coax Cable (Good)
Coax Cable (Better)
Coax Cable (Best)
FAQ

 Patented Semi-Rigid
 Coax Cable Tools
Cable Stripping
Pointing
Precision Cutting
Cable Bending
Crimping
Custom Tools
Custom Fixtures
Hand Tools
Price List
FAQ

 
Testing
To 40 GHz
Click for printable page!

CRIMPING TOOLS
PNEUMATIC CRIMPER : Model # BTC-3000

Accepts Standard and MIL M22520 Dies
The Pneumatic Crimper machine is designed to allow the greatest flexibility in hex crimping by allowing the use of Standard and MIL M22520 Dies. The versatile frame provides a high degree of efficiency and reliability. Closing speed and crimp pressure are adjustable.

Quick Die Changes
The Crimper is equipped with a quick-change crimp frame. The bottom die just lifts out and the top die is held in place with only 1 set screw.

Foot Pedal Operation
The closing ram is activated by an operator controlled foot pedal. Die closing can be interrupted at any time to reposition the work by releasing the foot pedal thereby giving the operator full cycle control.

Options
Custom crimp frames for miniature and non-standard dies are available. Dies for special purposes can be made to customer specifications.


BASE PRICE: $4,350.00



Specifications

Actuator Diameter
5 inches (127 mm)
Height
16 inches (406.4 mm)
Weight
80 lbs. (36.29 Kg)
Fully Equipped with Pressure Gages and Control Valve
.
Maximum Crimp Force @ 100 psi (0.0703 kgf/mm˛)
1 ton (907.2 Kg.)
Support Column Diameter
3 inches (76.2 mm)
Crimp Stroke
0.5 inch (12.7mm)
Total Possible Stroke
2 inches (50.8mm)
©2004 Florida RS Technology. All Rights Reserved.
CALL: 772-221-8188         FAX: 772-221-1095         E-MAIL: SALES@FLRST.COM